DragonFlight Universal Motor Pod Mount
The one that started it all.
The DragonFlight Universal Motor Pod Mount is a precision-engineered 3D-printed mount that fits FoilDrive, 6384, and 6374 motors. Designed and made in South Africa for the global foiling community.
Key Features
Three Components. Zero Compromise.
Each part is purpose-built and 3D-printed for its specific role.
Side Profile
Black = ABS motor puck · White = spacer (non-FoilDrive) · Red = flexible TPU body
Internal Puck
Hard ABS puck with 8 precision screw positions — 4 for universal motors, 4 for FoilDrive. Sits inside the TPU shell.
TPU Exterior
Flexible TPU body with auto-guide cable tie channels. The slots guide ties through both TPU and ABS for maximum rigidity.
The Evolution of Motor Mounting
From clamp-on chaos to clean machine. Less drag, less cost, less hassle.
Best performance. Lowest cost. Universal fit. The math checks out.
Less disruption. Less cost. More ride. That's the evolution.
Engineered Different
(every detail is intentional)
Minimal Disruption to Laminar Flow
The pod's side profile sits tight against the mast with the lowest possible frontal area. Water flows around it, not into it. The teardrop shape and trailing edge were iterated dozens of times to minimize drag — because every fraction of a knot matters when you're foiling.
Hard ABS Motor Puck — 8 Screw Positions
The motor puck is 3D-printed in hard ABS for maximum rigidity. Eight precision screw positions are built in — four for universal motors (6384/6374) and four specifically for FoilDrive motors. The puck sits inside the flexible TPU body, giving you a rock-solid motor platform that won't flex under load.
Auto-Guide Cable Tie Channels
This was the hardest part to design — and the bit I'm most proud of. Precision channels guide the cable ties through both the TPU body and the ABS puck, which adds serious rigidity to the whole assembly. The ties exit on the opposite side of the pod where you pull them tight with pliers. No screws from the front. No drilling into your mast. To remove after a session? Cut two cable ties and you're done. The three small security screws on the back are optional — for those who want extra peace of mind.
On the Mast
Installed on an Armstrong carbon mast — the real deal.
Specifications
| Material | Flexible TPU body + hard ABS motor puck |
| Motor Puck | 8 screw positions (4× universal, 4× FoilDrive) |
| Compatible Motors | FoilDrive, 6384, 6374 |
| Mounting System | Auto-guide cable tie channels (through TPU + ABS) |
| Install Time | Under 5 minutes |
| Tools Required | Pliers for cable ties (included) |
| Mast Compatibility | Universal — fits most hydrofoil masts |
| Weight | Lightweight 3D-printed construction |
| Includes | Mount, spacer, hardware kit, cable ties |
| Made In | South Africa 🇿🇦 |
DragonFlight Cable Guide
Because spaghetti belongs on a plate.
The DragonFlight Cable Guide keeps your motor cables neat, tidy, and away from your prop. 3D-printed in flexible TPU for universal mast compatibility. Apply a thin bead of silicone to bond it to your mast — let it cure overnight and you're set for life.
Key Features
Specifications
| Material | Flexible TPU |
| Install Time | 5 min application + overnight cure |
| Tools Required | Silicone sealant (marine grade recommended) |
| Mast Compatibility | Universal — fits most hydrofoil masts |
| Function | Cable management & prop protection |
| Made In | South Africa 🇿🇦 |
Installation Guide
(it's embarrassingly simple)
